Panasonic AJHPX2700G AJHPX2700G User Guide - Page 42
To stop the ONE SHOT mode of INTERVAL REC, To stop the Interval recording mode
View all Panasonic AJHPX2700G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
For continuous recording Press either the REC START/STOP button or VTR button at the lens, again. Interval recording resumes. To stop recording Press the STOP button. Recording stops. Then, the camera accesses the P2 card to record the video stored in memory before recording stops. The record from the beginning of the interval recording to the moment of pressing the STOP button is generated as one clip. To stop the Interval recording mode Setting the menu option INTERVAL REC MODE to "OFF". When INTERVAL REC HOLD is set to "OFF", the mode returns to ordinary recording mode if the POWER switch of the unit is turned off. If INTERVAL REC HOLD is set to "ON", the interval recording mode will not change even if the POWER switch is turned off. Shooting procedures for the ONE SHOT mode of INTERVAL REC After setting the INTERVAL REC mode, follow these steps: 1 Following basic operations of shooting and recording according to [Basic Procedures], lock the camera securely. 2 Press either the REC START/STOP button or VTR button at the lens. The unit automatically goes into ONE SHOT pause mode after the specified REC TIME. 3 Performs recording for the duration specified under the REC TIME option by pressing either the REC START/ STOP button or VTR button at the lens, and returns to ONE SHOT pause mode. 4 Press the STOP button. The video and sound stored in memory are generated as one clip. iREC start Real-time video/ sound A Time Axis t iREC start STOP button B REC TIME t (Recording time=t) Content on P2 card Previous clip AB One clip To check the previous recording during a pause Press the RET button at the lens to put the unit into REC REVIEW mode. ONE SHOT operation continues after the REC REVIEW. To divide clips or to change the P2 card used for recording Even during ONE SHOT mode, clips will not be generated on the P2 card until the STOP button is pressed. Press the STOP button, and stop ONE SHOT mode operation. To stop the ONE SHOT mode of INTERVAL REC Set the menu option INTERVAL REC MODE to "OFF". When INTERVAL REC HOLD is set to "OFF", the mode returns to ordinary recording mode if the POWER switch of the unit is turned off. If INTERVAL REC HOLD is set to "ON", the interval recording mode will not change even if the POWER switch is turned off. 42 Recording and Playback: Interval Recording