Panasonic AJHPX2700G AJHPX2700G User Guide - Page 145

Model, Date/time, Serial, Verify, Notes, On/finished, On/failed

Page 145 highlights

Connection with external device 8. MODEL This section indicates the model of the P2 card that originally contained data on the partition. Note Press the cursor button (Z) to switch to the PARTITION NAME. Press the [Y] button to return to the original model name display. Enter the PARTITION NAME from the soft keyboard by selecting CHANGE PARTITION NAME in the OPERATION menu while the thumbnail of the hard disk drive is displayed. (Max. 20 characters) 11. VERIFY This section indicates the verification setting and results at the time the data on the partition was recorded. ON/FINISHED: Verification was performed and the results agreed. ON/FAILED: Verification was performed and the results did not agree. OFF: No verification was performed. - - -: No verification information is available. Notes Even for a FAT-type hard disk drive, the 1001st or later clips are not shown. For a FAT-formatted hard disk drive, the information about only the first partition is shown. For a P2 STORE (AJ-PCS060G) that has an invalid partition, that partition information is shown in gray. 12. NAME This section indicates the PARTITION NAME. Formatting a hard disk drive 1 Switch the mode to USB HOST. For more information, see [Switching to the USB HOST mode] (page 143). 2 Connect the hard disk drive via USB. 3 Press the THUMBNAIL button to display the thumbnail screen. 4 Press the THUMBNAIL MENU button and select HDD  EXPLORE from the thumbnail menu. The display provides a screen that shows the information about the hard disk drive. 5 From the menu, select OPERATION  FORMAT (HDD) and select YES using the cursor buttons and SET button. Then, the confirmation message is displayed again. Select YES. 6 The unit starts formatting the hard disk drive. Once formatted, the hard disk drive can be treated as a TYPE S HDD. Note Formatting a hard disk drive erases all contents of it. Note that you cannot erase the contents of certain partitions by specifying them. 9. DATE/TIME This section indicates the date and time the data on the partition was recorded. 10. SERIAL This section indicates the serial number of the P2 card that originally contained the data on the partition. 145 Connection with external device: Connection with external devices using the USB 2.0 port

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206

145
Connection with external device: Connection with external devices using the USB 2.0 port
Connection with external device
8.
MODEL
This section indicates the model of the P2 card that
originally contained data on the partition.
¡
Note
Press the cursor button (
Z
) to switch to the PARTITION
NAME. Press the [
Y
] button to return to the original
model name display.
Enter the PARTITION NAME from the soft keyboard by
selecting CHANGE PARTITION NAME in the
OPERATION menu while the thumbnail of the hard disk
drive is displayed. (Max. 20 characters)
9.
DATE/TIME
This section indicates the date and time the data on the
partition was recorded.
10. SERIAL
This section indicates the serial number of the P2 card
that originally contained the data on the partition.
11. VERIFY
This section indicates the verification setting and results
at the time the data on the partition was recorded.
ON/FINISHED:
Verification was performed and the results agreed.
ON/FAILED:
Verification was performed and the results did not
agree.
OFF:
No verification was performed.
- - -:
No verification information is available.
¡
Notes
y
Even for a FAT-type hard disk drive, the 1001st or
later clips are not shown.
y
For a FAT-formatted hard disk drive, the information
about only the first partition is shown.
y
For a P2 STORE (AJ-PCS060G) that has an invalid
partition, that partition information is shown in gray.
12. NAME
This section indicates the PARTITION NAME.
1
Switch the mode to USB HOST.
For more information, see [Switching to the USB HOST
mode] (page 143).
2
Connect the hard disk drive via USB.
3
Press the THUMBNAIL button to display the thumbnail
screen.
4
Press the THUMBNAIL MENU button and select HDD
±
EXPLORE from the thumbnail menu. The display
provides a screen that shows the information about the
hard disk drive.
5
From the menu, select OPERATION
±
FORMAT (HDD)
and select YES using the cursor buttons and SET
button. Then, the confirmation message is displayed
again. Select YES.
6
The unit starts formatting the hard disk drive. Once
formatted, the hard disk drive can be treated as a
TYPE S HDD.
¡
Note
Formatting a hard disk drive erases all contents of it.
Note that you cannot erase the contents of certain
partitions by specifying them.
Formatting a hard disk drive