Panasonic AJHPX2700G AJHPX2700G User Guide - Page 170
LCD MONITOR, GENLOCK, SETTING, Items, Data Saved, Adjustable, Range, Remarks, NORMAL, MIRROR, HD SDI
View all Panasonic AJHPX2700G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 170 highlights
LCD MONITOR Items/ Adjustable Data Saved Range Remarks BRIGHTNESS -7 : +0 : +7 -CUF - Adjust the LCD monitor brightness. COLOR LEVEL -7 : +0 : +7 -CUF - Adjust the LCD monitor chroma level. CONTRAST -7 : +0 : +7 -CUF - Adjust the LCD monitor contrast. BACKLIGHT NORMAL HIGH Adjust the backlight. NORMAL: Mode normally used HIGH: This is brighter than NORMAL. -CUF - SELF SHOOT NORMAL MIRROR Select whether or not to change the LCD monitor to mirror image. NORMAL: Do not change to mirror image. MIRROR: Change to mirror image. -CUF - GENLOCK Items/ Adjustable Data Saved Range Remarks GENLOCK INT EXT Switch the camera synchronizing signal. INT: Synchronize with the internal reference signal regardless of the reference signal input to the GENLOCK IN connector. EXT: Synchronize with the reference signal input to the GENLOCK IN connector. - CU F R GL PHASE HD SDI COMPOSIT - CU F R For selecting the output signals that lock phases to the signals that are input in the GENLOCK IN connector. Note, however, that in 1080-23.98PsF mode and 108024PsF mode, the phase is locked to HD SDI even if "COMPOSIT" has been selected. HD SDI: For locking the HD SDI output signals to the GENLOCK input. For the down converter output signals, the start position of the video delays by about 90 lines. COMPOSIT: For locking the down converter output signals to the GENLOCK input. For the HD SDI output signals, the start position of the video gains by about 90 lines. H PHASE -100 COARSE : +000 : +100 ----- Perform coarse phase adjustment for horizontal hold when configuring a system. Items/ Adjustable Data Saved Range Remarks H PHASE FINE -100 : +000 : +100 Perform fine phase adjustment for horizontal hold when configuring a system. ----- 1394 SETTING Items/ Adjustable Data Saved Range Remarks 1394 SPEED S100 S200 S400 For setting the transfer rate of signals output from the DVCPRO connector. S100: 100 Mbps S200: 200 Mbps S400: 400 Mbps -CUF - 1394 IN CH 0 : 63 AUTO For setting the input channel of signals input to the DVCPRO connector. 0 - 63: To fix to the designated value AUTO: To follow the settings of the externally connected devices -CUF - 1394 OUT CH 0 : 63 AUTO -CUF - For setting the output channel of signals output from the DVCPRO connector. 0 - 63: To fix to the designated value AUTO: To follow the settings of the externally connected devices 1394 CONTROL OFF BOTH For setting the control for recording start/ stop operations of external devices that are connected to the DVCPRO connector. OFF: Do not control the externally connected devices. BOTH: To control both the unit and the externally connected devices -CUF - 1394 CMD SEL REC_P STOP For setting the control of recording stop operations of the external devices that are connected to the DVCPRO connector. REC_P: Operation to pause recording STOP: Stopping operation -CUF - 170 Menu: Menu Description Tables