Panasonic AJHPX2700G AJHPX2700G User Guide - Page 91

Adjustments and Settings for Recording 4 To format the SD memory card, turn the jog dial button to move the arrow (cursor) to YES. Then, press the dial button. When the SD memory card has been formatted, the following message appears: The card will not be formatted if the following message appears when the jog dial button is pressed: Error message Remedy CONFIG NG Insert an SD memory card. NO CARD (No SD memory card inserted.) CONFIG NG ERROR (SD memory card cannot be formatted.) The card may be defective. Replace the card. CONFIG NG WRITE PROTECT (SD memory card is writeprotected.) Remove the card and cancel the protect. CONFIG NG CANNOT ACCESS (SD memory card not accessible). Example: The SD memory card is not accessible because it is being played back. After the operation in process, format the card. 5 To exit the menu, press the MENU button. The settings menu disappears and the status of the unit is indicated at the top and bottom of the viewfinder screen. Note When an SD memory card is inserted or removed with the screen open, the titles of data on the card cannot be updated. Move the cursor to the option TITLE READ and press the jog dial button. The titles of the data will be updated. To write set data on an SD memory card 1 Navigate the menu to the screen. To select a file number 2 Turn the jog dial button to move the arrow (cursor) to the option W.SELECT. Then, press the dial button. 3 Turn the jog dial button to select a desired number (1 - 8). Then, press the dial button. To give the selected file a title 4 Turn the jog dial button to move the arrow (cursor) to the option TITLE. 5 Press the jog dial button. This moves the arrow (cursor) to the entry area, putting the unit in entry mode. 91 Adjustments and Settings for Recording: Handling data