Panasonic AJHPX2700G AJHPX2700G User Guide - Page 84

Display Modes and Setting Changes/adjustment Result Messages The messages that appear on the viewfinder screen to indicate changes to settings and adjustment results may be limited, or set not to appear, through the menu option DISP MODE. This menu option can be found in the screen on the VF page. For directions on navigating the menu, see [Setting Menu Options] (page 163). Setting change/adjustment messages and DISP MODE settings Message appears when: Message CC filter/ND filter changed. Gain changed. WHITE BAL switch re-positioned. OUTPUT/AUTO KNEE switch positioned at [AUTO KNEE] or [OFF]. Shutter speed/mode changed. White balance adjusted (AWB performed). Black balance adjusted (ABB performed). Extender selected. User button selected. Iris being overridden. : Message appears. : Message does not appear. ND: n (n=1, 2, 3, 4), CC: m (m=A, B, C, D) GAIN: n dB (n=-3, 0, 3, 6, 9, 12, 15, 18, 21, 24, 27, 30) WHITE: n (n=A, B, PRE) AUTO KNEE: ON (or OFF) 1/180.0 deg (or 1/172.8 deg, 1/144.0 deg, 1/120.0 deg, 1/90.0 deg, 1/45.0 deg, 1/ , X1/ , X . deg, XX1/ ) Example: AWB A OK 3.2 K Example: ABB OK Example: EXTENDER ON Example: UM: SLOT SEL Example: ++ F 5.6 DISP MODE settings 123 Setting the Marker Displays The center, safety zone, safety zone area and frame markers may be set to on or off, along with specifications of the marker types. To set and select markers, go to the screen from the VF page and select the appropriate options. For directions on navigating the menu, see [Setting Menu Options] (page 163). Note The indication "MRK: A" at the upper right of the screen shows the current indication status. To view TABLE B, press the MARKER SELECT button. This changes the indication to "MRK: B", allowing you to view the settings. 84 Adjustments and Settings for Recording: Viewfinder Screen Status Displays