Panasonic AV-UHS500 4K Switcher Operating Instructions - Page 107
Setting the HDMI output signals, HDR BT.2020, ME PGM, AUX1 to 4, MV1, MV2, KeyOut, WUXGA, Native
View all Panasonic AV-UHS500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
Input/output signal settings Setting the HDMI output signals Set the HDMI output signals of the standard output (HDMI OUT) and the HDMI output signals if the HDMI output unit (optional) has been connected. 1 On the Output sub menu, use [F2] to select the output to be set using the Select item. Refer to "Output signal settings". 2 From the Output sub menu, use [F4] to set the output color range in the Color Space item. HDR BT.2020 High dynamic range, color range output is Rec.2020. HDR BT.709 High dynamic range, color range output is Rec.709. SDR BT.709 Standard dynamic range, color range output is Rec.709. 3 Use [F1] to display the Assign sub menu. 4 Use [F2] to set the type of output signal using the Source item. PGM PVW CLN ME PGM AUX1 to 4 MV1, MV2 KeyOut An image provided with the wipe, mix, key, downstream key or other effect is output at the switcher's main line output. This is the preview output that enables the next operation to be checked before it is executed. The clean signal (the image resulting when the key, downstream key or other effect has been removed from the PGM signal) is output. ME PGM signals (images without the downstream key effects) are output. The signals selected by the 4 lines of AUX buses (AUX1 to AUX4) are output. The multi view display signals are output. Multiple input signals and output signals are reduced in size and output to one screen. The key signal is output. The settings below are possible when an HDMI Output Unit (optional) is connected. 5 Use [F1] to display the HDMI Output sub menu. 6 Use [F2] to select the resolution of the images to be output using the Size item. Auto XGA WXGA SXGA WXGA+ UXGA WUXGA WQHD Native The equipment information of the output destination is captured by the HDMI signals, and the images are output at the optimum resolution. (1024 × 768) / 60 Hz (1280 × 768) / 60 Hz (1280 × 1024) / 60 Hz (1680 × 1050) / 60 Hz (1600 × 1200) / 60 Hz (1920 × 1200) / 60 Hz (2560 × 1440) / 60 Hz Same format as the system format is output. 7 Use [F3] to set the output color space in the Color item. Auto RGB YUV444 YUV422 Device information about the connection destination is obtained via the HDMI signal, and output uses the optimum color space accordingly. The color space is set with the RGB format. The color space is set with the Y, Cb, Cr at 4:4:4. (With this method, for each 4 horizontal pixels, 4 pixels each are sampled of the luminance component and 2 color difference components) The color space is set with the Y, Cb, Cr at 4:2:2. (With this method, for each 2 horizontal pixels, 1 pixel each is sampled of the color difference components, and each pixel is sampled of the luminance component) 107