Panasonic AV-UHS500 4K Switcher Operating Instructions - Page 108
Setting the down-converter (option), Fit-V, Fullx80, Minimum, 1F Fix
View all Panasonic AV-UHS500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
Input/output signal settings 8 Use [F4] to select the scaling method using the Scale item. Fit-V Fit-H Full Fullx80% Fullx90% The aspect ratio of the output images is maintained, and the size of the images is increased or reduced in accordance with the vertical resolution. (Black bands are inserted into the areas where there are no images. The protruding parts of the images are cropped.) The aspect ratio of the output images is maintained, and the size of the images is increased or reduced in accordance with the horizontal resolution. (Black bands are inserted into the areas where there are no images. The protruding parts of the images are cropped.) The size of the output images is increased or reduced in accordance with the system resolution. The size of the output image is increased or reduced in accordance with the 80% size of the system resolution. The size of the output image is increased or reduced in accordance with the 90% size of the system resolution. ppThe aspect ratio is not maintained at the Full, Fullx80% or Fullx90% setting. The rate at which the image size is increased or reduced in the vertical direction and in the horizontal direction differs. 9 Use [F5] to set the image movement detection sensitivity using the Move Detect item. 1 Toward still images 3 Standard 5 Toward moving images Setting the down-converter (optional) Select the settings for the down-converter that is built into the SDI output unit (AV-UHS5M2). 1 On the Output sub menu, use [F2] to select the output to be set using the Select item. Refer to "Output signal settings". 2 Use [F1] to display the Down Converter sub menu. 3 Use [F2] to set the delay time of the output using the Delay item. Minimum 1F Fix Output is with the minimum delay of the system. Refer to "Adjusting the output signal phase" for the size of phase delays. The image is output in-phase with a delay of 1 frame from the system image (HD). 4 Use [F3] to set the extent of the edge sharpness for the images using the Sharp item. 1 Standard 5 Very sharp edges 108