Panasonic AV-UHS500 4K Switcher Operating Instructions - Page 78

Basic operations  Setting the event switching effect (Path) Switching from one event to another (bus switching) can be accomplished smoothly. 1 Press the SHOT EVENT button to light its indicator, and display the Event Memory menu. 2 Use [F1] to display the Path sub menu. Macro memory settings Recording non-operation periods 1 Press the VMEM MACRO button to light its indicator, and display the Macro menu. 2 Use [F1] to display the Insert Delay sub menu. 3 Use [F2] and the Trans Path item to set how transitions to the next event are performed. The following transitions are available: ppWidth of the borders ppSoft effect of the borders ppPositions of the images ppTrimming values Linear Spline Step The switching from one image to another is interpolated linearly. The switching from one image to another is interpolated over a smooth curve (a cubic function curve). The parameters are updated when the events are passed through. 4 Use [F3] to select the effect when the colors are switched using the Hue Path item. The following hues are targeted. ppColors of the color background ppColors of the borders ppColors of the edges ppColors of the fill matte Short Long CW CCW Step The colors are changed toward less hue on the vectorscope. The colors are changed toward more hue on the vectorscope. The Hue is changed clockwise on the vectorscope. The Hue is changed counterclockwise on the vectorscope. The color changes are updated when an event is passed through. 3 Use [F2] to set the time of the non-operation period in the Time item. 4 Use [F3] to save the time set in Step 3. Assigning macro memories You can assign registered macro memories to the AUX bus crosspoint buttons. 1 Press the VMEM MACRO button to light its indicator, and display the Macro menu. 2 Use [F1] to display the Macro Assign1/6 to 6/6 sub menu. 3 Use [F2] to [F5] in each of the sub menus to set the macro memories assigned to each crosspoint in the XPT1 to 24 items. 78