Panasonic AV-UHS500 4K Switcher Operating Instructions - Page 37
Setting the wipe start position, Modifying wipe, Target patterns, <X-Pos, Y-Pos setting range>
View all Panasonic AV-UHS500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Basic operations Setting the wipe start position Wipe start can be set at any desired position. Target patterns: WIPE1: 5 WIPE2: 4, 5, 6, 7 SQ1: 5 SQ2: 4, 5, 6, 7 The WIPE pattern is set using the Position sub menu of the Background menu (or Key menu). 1 Press the BKGD CBGD button (or KEY1 CKEY button) to light its indicator, and display the Background menu (or Key menu). 2 Use [F1] to display the Position sub menu. Modifying wipe Setting the 3D (page turning) effect A lighting effect can be added to a wipe pattern. Alternatively, the page turning effect parameter can be set. These effects can be set for background transitions and key transitions. Target patterns: 3D1: 1, 3, 7, 9 1 Press the BKGD CBGD button (or KEY1 CKEY button) to light its indicator, and display the Background menu (or Key menu). 2 Use [F1] to display the 3D Modify sub menu. 3 Either operate the positioners or use [F2] and [F3] to set the wipe start position using the X-Pos item and Y-Pos item. This setting is possible only if the target pattern has been selected for the background or key pattern. 4 Either operate the fader lever or press the [AUTO] button to check the wipe operation. (When, for instance, -50 has been set for X-Pos and -50 for Y-Pos, the following screen (or key) appears from the bottom left and wipe is performed while the screen (or key) moves to the screen center.) 3 Use [F2] to select whether the lighting effect is to be added using the Light item. On The lighting effect is added. Off The lighting effect is not added. 4 Use [F3] to set the size when images have been reduced using the Size item. 5 Use [F4] to set the radius of the page turning effect using the Radius item. 6 Use [F5] to set the direction of the page turning effect using the Angle item. Inside screen area Outside screen area 5 To copy the start position setting, press [F5] (Copy To Key1 or Copy To BKGD). The background setting is copied to the key setting while the key setting is copied to the background setting. 37