Panasonic AV-UHS500 4K Switcher Operating Instructions - Page 83
Saving Images in Flash Memory, If the unit is initialized, video memory that has been
View all Panasonic AV-UHS500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Basic operations U se [F4] to set the maximum recording time using the Limit item. U se [F1] to display the Video Memory1 sub menu. U se [F1] to display the Play Mode2 sub menu. > U se [F4] to set the sound to be recorded with the Audio item. A s soon as [F3] (Rec) is pressed, the recording of the moving images starts. W hen [F5] (Stop) is pressed, the recording of the moving images is stopped. ppIf the [VMEM] button on the right of the number keys is pressed and the video memory operation mode has been established, the operation of this button is linked with the -/+ PAGE button among the number keys. ppThumbnails of moving images are displayed on the thumbnail screen. While the thumbnails are displayed, the following information is also displayed on the thumbnail screen. Current playback position (time), IN point position, OUT point position ppWith the moving images on which the key signals are recorded, a white "" mark is displayed for the thumbnail icons. ppThe recording time is displayed in the Total Time item of the Video Memory3 sub menu. However, if trimming has been performed, the time from the IN point to the OUT point after trimming is displayed. Also, "On" is displayed for the Key item when the key signals have been recorded. Saving Images in Flash Memory Data for images stored in the video memory can be retained even when the power is turned off, by saving them in the flash memory area. Whether to automatically save the image data stored in the video memory when the data is transferred from the AUX bus or to manually save them must be set. Notes pp If power to the unit is turned off when the saving of data has not finished, video memory data will be lost. pp Video memory data that has been saved is always restored when the power is turned on. pp If the unit is initialized, video memory that has been saved to flash memory will be lost. 1 Press the VMEM MACRO button to light its indicator, and display the Video Memory menu. 2 Use [F1] to display the Memory sub menu. 3 Use [F2] to select the saving method using the Mode item. Auto Manual Automatic saving Manual saving 4 Use [F3] to select the video memory for saving data in the flash memory area using the Select item. If "All" is selected, all video memory will be saved. Video memory that has finished being recorded is saved to the flash memory area. 5 Press the [F5] (Save) to save data in the flash memory area. pp[F3] (Select) and [F5] (Save) are enabled when "Manual" is selected for the Mode item. ppWhen "Auto" is selected for the Mode item, if video memory recording is stopped, the video memory is saved to the flash memory area immediately after recording stops. However, if the power is cut off during recording, the video memories will not be saved in the flash memory area. 83