Panasonic AV-UHS500 4K Switcher Operating Instructions - Page 58

Basic operations The recorded combination information can be set from combinations of Coupling1 to 8 in the Key Signal Coupling sub menu. The initial values for the DSK source signal and the DSK fill signal are the same. Independently set the selection for the DSK fill signal and the DSK source signal 1 From the DSK menu, use [F1] to display the DSK Signal Coupling sub menu. DSK transitions 1 Set the transition time. Press the TIME CAM button to light its indicator, and display the Time menu. 2 Use [F1] to display the DSK sub menu. As with background transitions, set the transition time.  Refer to "Auto transition". 3 When the [DSK ON] button in the transition area is pressed, the DSK image is combined (fades in) for the length of the transition time that has been set. During fade-in, the [DSK ON] button blinks in red, and when the transition (fades in) is completed, it lights in red. When the [DSK ON] button is pressed after fade-in is completed, the DSK image transitions (fades out). During fade-out, the [DSK ON] button lights in red, and when the transition (fades out) is completed, it goes off. If the [DSK ON] button is pressed at any point during a transition, the direction of the transition is reversed. 2 Use [F2] to set On/Off in the Independent item. When the [DSK] button lights in amber, the DSK fill signal can be selected, and when it lights in green, the DSK source signal can be selected. 58