Panasonic AV-UHS500 4K Switcher Operating Instructions - Page 20
User button area, Transition area
View all Panasonic AV-UHS500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Parts and their functions User button area User buttons (USER BUTTON) [U1 to U8] These are used to assign some functions of the menu settings to the [U1] to [U8] buttons on the Config menu. Refer to "Setting the user buttons". U1 U2 U3 U4 U5 U6 U7 U8 USER Transition area MACRO BKGD MIX WIPE MIX KEY MIX WIPE WIPE N/R R WIPE DIRECTION FTB ON KEY1 ON KEY2 ON KEY3 ON DSK1 ON CUT AUTO DSK2 ON [MACRO] button This executes the Macro memory set in XPT with Macro Assign in the menus. The [AUX] button, in which Macro memory is set with Macro Assign in the menus, turns green when the [MACRO] button is selected and turns amber. The registered Macro memory is executed when the illuminated button is selected. [KEY] button This executes the KEY1 transition when the [CUT] button (), [AUTO] button () or fader lever () has been operated. When the [KEY] button is pressed and it is selected, its indicator lights in amber. If the [BKGD] button () is now pressed, the indicator goes off, and the de-selected status is established. When the [BKGD] button () and [KEY] button are pressed at the same time, both buttons are set to the selected status. [BKGD] button This executes the background transition when the [CUT] button (), [AUTO] button () or fader lever () has been operated. When the [BKGD] button is pressed and it is selected, its indicator lights in amber. If the [KEY] button () is now pressed, the indicator goes off, and the de‑selected status is established. When the [BKGD] button and [KEY] button () are pressed at the same time, both buttons are set to the selected status. M IX, WIPE selection status LEDs These light up to indicate whether MIX or WIPE has been selected when background transitions or key transitions are executed. [MIX] button This is used to switch the A and B bus images while making them overlap. During the transition, the A and B bus output total is kept at 100%. When the [MIX] button is pressed and it is selected, its indicator lights in amber. If the [WIPE] button () is now pressed, it goes off, and the de-selected status is established. 20