Panasonic AV-UHS500 4K Switcher Operating Instructions - Page 23
Menu selection buttons MENU, MENU HOLD] button, Rotary encoders [F1] to [F5], MENU OFF], PICT]
View all Panasonic AV-UHS500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Parts and their functions ppMenu display/WFM display (or VECTOR display)/Image display The image display and the WFM display (or VECTOR display) displayed in the upper portion of the built-in display can be switched by pressing the [PICT] button or the [WFM/VECT] button. [MENU OFF]: This button clears the menu display and switches to the image-only display. [PICT]: When this button is pressed and lit, images are displayed on the built-in display. [WFM/VECT]: When this button is pressed and lit, waveforms (WFM: waveform monitor) or vectors (VECTOR: vectorscope) are displayed on the built-in display. Each time the button is pressed, the display switches between WFM and VECTOR. ppWFM (waveform monitor) display M enu selection buttons (MENU) Each time one of these buttons is pressed, the menu of the function indicated at the top or bottom of the button is selected. The button of a selected menu lights up in amber. [MENU HOLD] button This button is used to keep a menu on the display. When it is pressed while a menu is displayed, the menu displayed will not be switched to another menu even when one of the menu selection buttons is pressed. While the [MENU HOLD] button is pressed, the [MENU HOLD] button lights up in amber. Rotary encoders [F1] to [F5] These are used to set the parameters which are displayed on the built-in display. Refer to "Basic menu operations". ppVECTOR (vectorscope) display 23