Panasonic AV-UHS500 4K Switcher Operating Instructions - Page 118
System settings, Setting the system format, Switcher mode settings
![]() |
View all Panasonic AV-UHS500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
System settings Setting the system format One system format (input/output signal) can be selected. Do not change the format during any of the following operations: ppWhen reading from a memory card or saving to a memory card ppWhen restoring data from video memory or saving data to flash memory ppWhen recording moving images or still images ppWhen moving images are playing 1 Press the CONF SYS button to light its indicator, and display the System menu. 2 Use [F1] to display the Format sub menu. 3 Use [F2], select the format using the Format item, and press the [F2] to enter the selection. Switcher mode settings 1 From the Format sub menu, use [F3] to select either 2K or 4K in the Switcher item, then press [F3] to confirm the selection. ppWhen the Switcher mode is changed from either 2K to 4K or from 4K to 2K, a dialog is displayed, so press [F1] to restart the unit. The menu values are initialized after restart. Dynamic range and color range settings 1 From the Format sub menu, use [F4] to select the dynamic range and color range of the image signals handled by this unit in the Color Space item, then press [F4] to confirm the selection. HDR BT.2020 The dynamic range is HDR and color range operates as BT.2020. HDR BT.709 The dynamic range is HDR and color range operates as BT.709. SDR BT.709 The dynamic range is SDR and color range operates as BT.709. 118
![](/manual_guide/products/panasonic-avuhs500-4k-switcher-operating-instructions-cf62810/118.png)