Panasonic AV-UHS500 4K Switcher Operating Instructions - Page 38

Basic operations Setting the trimming The trimming at the time a background transition is executed can be set. Target patterns: SQ1, SQ2, SL, 3D1, 3D2 1 Press the BKGD CBGD button (or KEY1 CKEY button) to light its indicator, and display the Background menu (or Key menu). 2 Use [F1] to display the Modify sub menu. 3 Use [F2] to set the trimming operation and transition operation using the Trim item. Off 16:9 4:3 4:3 Smooth No trimming For trimming the edges around the material. This setting is used when a black border, for instance, can be seen around the material. For trimming using the 4:3 aspect ratio and releasing the trimming when the transition is completed. For trimming using the 4:3 aspect ratio and executing the transition to 16:9 images smoothly. Setting the latency A delay amount can be set for the background image or key image. 1 Press the CONF SYS button to light its indicator, and display the Config menu. 2 Use [F1] to display the Latency sub menu. 3 Use [F2] to set the delay amount for the background image using the BKGD item. Alternatively, use [F3] to set the delay amount for the key image using the Key item. 1F Fix Minimum The image is delayed by one frame (1F).  T here will be no original image remaining when wipe is completed (when SQ1, SQ2, SL, 3D1 or 3D2 has been selected as the wipe pattern). The image is not delayed.  H owever, the image will be delayed by one frame (1F) when SQ1, SQ2, SL, 3D1 or 3D2 has been selected as the wipe pattern or when the flying key has been selected.  BKGD items Delay amount At times other than setting during transitions Minimum No delay 1F Fix 1F delay MIX/WIPE No delay 1F delay SQ/SL/3D 1F delay 1F delay  Key items Delay amount At times other than setting during transitions Minimum No delay 1F Fix 1F delay MIX/WIPE No delay 1F delay SQ/SL/3D/ Flying key 1F delay 1F delay 38