Panasonic AV-UHS500 4K Switcher Operating Instructions - Page 41
<Source To Fill>, <Fill To Source>
View all Panasonic AV-UHS500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Basic operations Linking the key fill signal and key source signal selection 1 Press the KEY button to be used to display the menu. (KEY1/KEY2/KEY3) 2 Use [F1] to display the Key Signal Coupling sub menu and set Independent. 3 Press the CONF SYS button to light its indicator, and display the Config menu. 4 Use [F1] to display the Key Signal Coupling1 sub menu and set Fill/Source. 5 Use [F1] to display the Key Signal Coupling2 to 8 sub menu. ppIf Key Signal Coupling1 is Fill to Source, select what to use as the Source for the Fill. ppAlternatively, if it is Source to Fill, select what to use as the Fill for the selected Source. When the key fill signal is selected, the key source signal also switches automatically. Initially, the key source signal and the key fill signal will be the same signal. For example, when "SDI1" is selected for the key fill signal, the key source signal also becomes "SDI1". After that, when the [KEY] button is pressed and lights in green, "SDI2" is selected for the key source signal. At this time, combination data indicating that the key fill signal is "SDI1" and the key source signal is "SDI2" is recorded on the unit. After the key fill signal and key source signal have been switched to other signals to perform another operation, if the key fill signal is then selected and set to "SDI1", the saved combination data causes the key source signal to automatically switch to "SDI2". If the key source signal is changed while the key fill signal is set to "SDI1", the combination data is updated to reflect the change, and is recorded on the unit. When the key source signal is selected, the key fill signal switches automatically. (The [KEY] button first lights amber.) The initial values for the key source signal and the key fill signal are the same. When the [KEY] button lights in amber, the key fill signal can be selected, and when it lights in green, the key source signal can be selected. Independent ON If Fill to Source, you can independently set a Source that is linked to Fill and separate from other KEYs. If Source to Fill, you can independently set a Fill that is linked to Source and separate from other KEYs. OFF Settings accord with Key Signal Coupling2 to 8. Setting the fill matte color 1 Press the KEY1 CKEY button to light its indicator, and display the Key menu. 2 Use [F1] to display the Fill Matte sub menu. 3 Use [F2], [F3] and [F4] to adjust the Hue, Sat and Lum of the fill matte. ww To call the preset color Use [F5] to select the preset color using the Load item, and press the [F5]. ppWhen [F5] is pressed, what has been set so far is canceled and replaced with the preset color values. ppTo save the values that were set before calling the preset color, refer to "Memory". 41