Panasonic AV-UHS500 4K Switcher Operating Instructions - Page 99
Setting the material names, Setting the up-converter
View all Panasonic AV-UHS500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Input/output signal settings Setting the material names Material names can be given to the input signals. These names can be selected from the default settings or user settings. 1 On the Input sub menu, use [F2] to select the input to be set using the Select item. Refer to "Input signal settings". 2 Use [F1] to display the Name sub menu. Setting the up-converter Select the settings for SDI IN5 to SDI IN8, as well as for the up-converter that is built into the optional unit listed below: ppAV-UHS5M1 (SDI Input Unit) 1 On the Input sub menu, use [F2] to select the input to be set using the Select item. Refer to "Input signal settings". 2 Use [F1] to display the Up/Down Converter sub menu. 3 Use [F2] to select the type of material names using the Type item. Default (default settings) User (user settings) Select the material names from the following: IN1, IN2, 12G SDI IN3 to 8, IN-A1 to 4, IN-B1 to 4 The material names are set using up to 32 characters. 3 Use [F2] to set the image movement detection sensitivity using the Move Detect item. 1 Toward still images 3 Standard 5 Toward moving images 4 Use [F3] to set the extent of the edge sharpness for the images using the Sharp item. 1 Not sharp edges 3 Standard 5 Very sharp edges 99