Panasonic AV-UHS500 4K Switcher Operating Instructions - Page 18

Parts and their functions Crosspoint area   KEY1 F/S AUX KEY2 F/S KEY3 F/S DSK1 F/S AMBER : FILL / GREEN : SOURCE DSK2 F/S AUX1 AUX BUS DELEGATION AUX2 AUX3 AUX4 DISP CAM  MV1 PGM MV2 PVW AUX /DISP SOURCE SHIFT   PGM A SHIFT 1/13 2/14 3/15 4/16 5/17 6/18 7/19 8/20 9/21 10/22 11/23 12/24 PST B SHIFT 4 PGM/A bus crosspoint buttons [PGM/A 1 to 12] These are used to select the PGM/A bus video signals. Buttons 1 to 24 can be selected using the [SHIFT] button.  Refer to "Selecting the bus using the SHIFT function". "A/B", "PGM-A/PST-B" or "PGM-B/PST-A" can be selected as the Bus Mode item by selecting the Config menu following by the Operate sub menu.  Refer to "Selecting the bus mode". When one of the crosspoint buttons (4, 5, 7) is held down, the name of the input material and the number of the crosspoint button are displayed. 5 PST/B bus crosspoint buttons [PST/B 1 to 12] These are used to select the PST/B bus video signals. Buttons 1 to 24 can be selected using the [SHIFT] button.  Refer to "Selecting the bus using the SHIFT function". "A/B", "PGM-A/PST-B" or "PGM-B/PST-A" can be selected as the Bus Mode item by selecting the Config menu following by the Operate sub menu.  Refer to "Selecting the bus mode". 6 A UX bus selector buttons (AUX BUS DELEGATION) Select the bus to be operated using the AUX bus crosspoint buttons (7). The selected button lights. [KEY1 F/S], [KEY2 F/S], [KEY3 F/S]: This button is used to change the AUX bus crosspoint buttons () into the source selector buttons for the key fill buses or key source buses. Each time it is pressed, the selector button function is switched between the key fill buses and key source buses. Amber Green Key fill buses Key source buses [DSK1 F/S], [DSK2 F/S]: This button is used to change the AUX bus crosspoint buttons () into the source selector buttons for the DSK fill buses or DSK source buses. Each time it is pressed, the selector button function is switched between the DSK fill buses and DSK source buses. Amber Green DSK fill buses DSK source buses [AUX1] to [AUX4]: These buttons are used to change the AUX bus crosspoint buttons (7) into the selector buttons for the sources of the AUX buses. [DISP/CAM] (built-in display/CAM): When the built-in display is selected, this switches the AUX crosspoint buttons (7) to DISP bus (the images displayed on the built-in display) source selector buttons. When CAM is selected this switches the AUX crosspoint buttons (7) to CAM source selector buttons. The selection switches between built-in display and CAM each time you press the button. Amber Green Built-in display selected CAM selected 7 A UX bus crosspoint buttons These buttons are used to select the source of the bus which was selected by the AUX bus selector button (6). Buttons 1 to 24 can be selected using the [SHIFT] button.  Refer to "Selecting the bus using the SHIFT function". 8 D edicated crosspoint buttons for the AUX/DISP bus (AUX/DISP SOURCE) While the [AUX1] to [AUX4] AUX bus selector buttons (6) are illuminated, these select AUX bus sources. While the [DISP/CAM] AUX bus selector button (6) is illuminated, it selects DISP bus sources. The buttons that are pressed turn amber. [MV1/MV2]: Selects either multi view display signal 1 or signal 2 for the AUX bus or the DISP bus. Switching between multi view display signal 1 and 2 is done with the [SHIFT] button (7). [PGM/PVW]: Selects either the PGM signal or the PVW signal for the AUX bus or the DISP bus. Switching between the PGM signal and the PVW signal is done with the [SHIFT] button (7). 18