Panasonic AV-UHS500 4K Switcher Operating Instructions - Page 126
Initialization, Initializing setting data, Initializing fader
View all Panasonic AV-UHS500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
System settings Initialization Initializing setting data Initialization returns the set data to the factory shipment status. When settings data is initialized, video memory that has been saved to flash memory is lost. ppThe items of the System menu listed below: Network1, Network2, Network3, Date, Time 1 Press the CONF SYS button to light its indicator and display the System menu. 2 Use [F1] to display the Initial sub menu. Initializing fader The range for executing a transition can be initialized by operating the fader lever. Initialization should be performed when transitions are not completed to the end even when the fader lever has been moved as far as it will go. 1 Press [F3] in the Initial sub menu to perform initialization. 2 When initializing, use [F1] to select "Yes" and press the [F1]. When not initializing, use [F5] to select "No" and press the [F5]. 3 Press [F2] to proceed with the initializing. ppOnce initialization has been completed the power of the unit shuts off and turns back on again automatically. 126