Panasonic AV-UHS500 4K Switcher Operating Instructions - Page 131
Selecting the cameras to be operated, Camera control is disabled if the menus displayed are
View all Panasonic AV-UHS500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
Remote camera link functions Selecting the cameras to be operated By connecting remote cameras to this unit, you can control remote cameras using the positioner and encoders of this unit. 1 Assign the remote cameras connected to XPT. Refer to "Selecting the terminals for remote camera connection" for information on how to assign. 2 Press the [DISP/CAM] button to make it turn green. KEY1 F/S AUX KEY2 F/S KEY3 F/S DSK1 F/S AMBER : FILL / GREEN : SOURCE DSK2 F/S AUX1 AUX BUS DELEGATION AUX2 AUX3 AUX4 DISP CAM XPT2 MV1 PGM MV2 PVW AUX /DISP SOURCE SHIFT 3 Select the remote cameras assigned in Step 1 as the CAM bus sources. ppThe selected buses turn green. The inputs that can be selected as the CAM bus sources are the following inputs. XPTs other than these cannot be selected. · IN1 to IN2 · SDI IN1 to SDI IN8 · IN-A1 to IN-A4 · IN-B1 to IN-B4 ppWhen remote camera control is enabled, the [CAM CONT] button blinks orange. Camera control is disabled if the menus displayed are as follows when the [MENU] button is pressed: · Background menu · Key1 to Key3 menu · DSK1 menu · Chroma Key menu · While the keyboard screen is being displayed 4 The pan and tilt on the remote camera connected to this unit are controlled by moving the positioner up, down, left, and right. PRJ SD Card MENU HOLD Z ZOOM ALARM LINK BKGD PATT KEY PATT VMEM CAM CONT Blinks X/Y PAN/TLT 5 Turning [Z] left and right adjusts the control speed for pan/tilt and operates the zoom. You can switch the control speed and zoom operation by pressing [Z]. 131