Panasonic AV-UHS500 4K Switcher Operating Instructions - Page 34
Manual transition, Top LED only lights, Top and bottom, LEDs light, Bottom LED only, lights, Frame
![]() |
View all Panasonic AV-UHS500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Basic operations Manual transition Operate the fader lever to execute transitions manually. If the fader lever has been operated during auto transition, auto transition will be switched to manual operation as soon as the fader position overtakes the amount of the transition being executed. The bus tally LEDs on the left of the fader lever indicate the program bus output status. Top LED only lights PGM/A bus output Top and bottom LEDs light During the transition Bottom LED only lights PST/B bus output Cut transition When the [CUT] button is pressed, the transition is executed instantly. Auto transition pp When the [AUTO] button is pressed, the transition is executed automatically using the transition time which has been set. pp The transition is executed in the remaining time when the [AUTO] button is pressed while the fader lever is being operated. pp The auto transition time is set using the Time menu. 1 Press the TIME CAM button to light its indicator, and display the Time menu. 2 Use [F1] to display the BKGD sub menu. 3 Use [F2] to set the transition time in frames. The display unit is set by selecting Config menu Operate sub menu Time Unit item. Sec Frame The time is displayed as a number of seconds. The time is displayed as a number of frames. Any time from 0 to 999f can be set. The time which can be set when seconds are used as the display unit differs depending on the system format. 59.94i: 50i: 29.97PsF: 24PsF: max. 33s09f max. 39s24f max. 33s9f max. 41s15f 59.94p: 50p: 25PsF: 23.98PsF: max. 16s39f max. 19s49f max. 39s24f max. 41s15f 34
![](/manual_guide/products/panasonic-avuhs500-4k-switcher-operating-instructions-cf62810/34.png)