Panasonic AV-UHS500 4K Switcher Operating Instructions - Page 54
PinP decorations, Copying the settings, Setting the border color, To call the preset color
View all Panasonic AV-UHS500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Basic operations When "Center" has been selected as the Symmetry setting The coordinates and rotation angle are made symmetrical to the center. PinP decorations A border or soft effect can be added to PinP. 1 Press the [Key2] button (2K/HD mode) or [Key1] button (in 4K mode or when there is no 4K DVE unit) to light the button and display the PinP menu. 2 Use [F1] to display the PinP Border sub menu. When "Same" has been selected as the Symmetry setting The coordinates are the same. Copying the settings The Key PinP settings can be copied to DSK PinP and, similarly, the DSK PinP settings can be copied to Key PinP. 1 On the PinP menu, use [F1] to display the PinP Sync sub menu. 2 Use [F2] to select "Off" using the Sync item. 3 When [F5] is pressed, the Key PinP (or DSK PinP) settings are copied and set in DSK PinP (or Key PinP). Note The following settings are not copied. ppPinP Trim sub menu items ppPinP sub menu items 3 Use [F2] to set On (or Off) for the border using the Border item. 4 Use [F3] to set the width of the border using the Width item. 5 Use [F4] to set the amount of soft effect using the Soft item. The soft effect is OFF if 0.0 is set. When "On" has been selected as the Border item setting, the ratio of the soft effect to the border width is indicated as the amount of soft effect. When only the soft effect is to be added to PinP, select "Off" as the Border item setting. 6 Use [F5] to set the change in the border width using the Mode item. Fix Variable The border width is kept constant. The border width changes to suit the PinP size. Setting the border color 1 On the PinP menu, use [F1] to display the PinP Border Color sub menu. 2 Use [F2], [F3] and [F4] to adjust the Hue, Sat and Lum of the border color. ww To call the preset color Use [F5] to select the preset color using the Load item, and press the [F5]. ppWhen [F5] is pressed, what has been set so far is canceled and replaced with the preset color values. ppTo save the values that were set before calling the preset color, refer to "Memory". 54