Panasonic AV-UHS500 4K Switcher Operating Instructions - Page 116
Setting the input signal marks, Setting the markers, F mark
![]() |
View all Panasonic AV-UHS500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
Input/output signal settings Setting the input signal marks The status of the input signals can be displayed in front of the material names displayed on the split screens. "F" mark: This appears when the input signals are frozen. " ! " mark: This appears when no signals are input or when signals with different formats are input. ppWhen the "F" mark is displayed, the "!" mark is not displayed. 1 On the Display sub menu, use [F3] to set the input signal status display using the Input Status item. On The input signal status is displayed. Off The input signal status is not displayed. Setting the markers Safety markers can be displayed for the multi view materials. 1 On the Display sub menu, use [F4] to set the marker display using the Marker item. 4:3 16:9 Off The markers are displayed using the 4:3 aspect ratio. The markers are displayed using the 16:9 aspect ratio. The markers are not displayed. 2 Use [F5] to set the size of the markers using the Marker Size item. 116
![](/manual_guide/products/panasonic-avuhs500-4k-switcher-operating-instructions-cf62810/116.png)