Panasonic AV-UHS500 4K Switcher Operating Instructions - Page 82

Basic operations Recording moving images (Clip) 1 Press the VMEM MACRO button to light its indicator, and display the Video Memory menu. 2 Use [F1] to display the Video Memory1 sub menu. 3 Use [F2] to select "Clip1" or "Clip2" using the Select item. ppOnly Clip1 can be selected in the 4K mode. 4 Use [F1] to display the Rec2 sub menu. 5 Use [F2] to set the images to appear on the built-in display using the Preview item. On The image appearing on the built-in display is forcibly switched to the image to be recorded (AUX1 to AUX4 selected using the V Source item) instead of the material selected by the DISP bus. Off The image source selected by the DISP bus is displayed as a preview. When "On" is selected for the Preview item, be aware that the following operations will occur: ppThe DISP button will link with the AUX bus selection button (AUX BUS DELEGATION) of AUX1 to AUX4 selected in the V Source item, which will light or turn off the buttons. ppIf the material of the DISP bus is changed, the materials of the DISP bus and the selected AUX bus change at the same time. Similarly, if the material of the selected AUX bus is changed, the material of the DISP bus changes at the same time. 6 Use [F2] and [F3] of Rec1 to set the images to be recorded in the video memory in the V Source item. AUX1 to AUX4 The output signals of the AUX buses (AUX1 to AUX4) are recorded as the material. 7 Use [F4] of Rec2 to set the review display in the Review item. On After the images have been recorded, the images of the video memory recorded in the AUX bus are displayed (up to 4 seconds). Off The review display is not shown. 8 Use [F1] to display the Rec3 sub menu. 9 Use [F2] to select the recording repeat setting using the Loop item. On The recording of the images is continued until the stop operation is performed. If either of the following operations is performed while recording is in progress, the images are recorded up to the last frame, after which recording stops.  W hen "Off" is selected as the Loop item setting.  W hen [Stop] ([F5] of Video Memory sub menu) is pressed. Off Images are recorded up to the maximum recording time (set using the Limit items), after which recording stops automatically.  U se [F3] to set the quality of the images to be recorded using the Quality item. Standard High Standard image quality High image quality Image quality depends on the video format. Standard High 2160/59.94p 2160/50p 2160/29.97p (*) 15 seconds 18 seconds 30 seconds High mode will be half the Standard mode. 2160/25p (*) 36 seconds 2160/23.98p, 24p (*) 37.5 seconds 1080/59.94p 60 seconds 1080/50p 72 seconds 1080/29.97psf 120 seconds 1080/25psf 144 seconds 1080/23.98psf, 24psf 150 seconds 1080/59.94i 120 seconds 1080/50i 144 seconds 720/59.94p 120 seconds 720/50p 144 seconds *: Planned support with a firmware update 82