Panasonic AV-UHS500 4K Switcher Operating Instructions - Page 65
Setting enable/disable for the AUX1/2 transition, transition
View all Panasonic AV-UHS500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Basic operations Setting enable/disable for the AUX1/2 transition The AUX1/2 transition time and transition enable/disable can be set. 1 Press the TIME CAM button to light its indicator, and display the Time menu. 2 Use [F1] to display the AUX1 BUS Trans sub menu. 3 When the transition time is to be set in frame units, use [F2] for the setting. 4 When the transition time is to be set in second units, use [F3] to set the seconds and [F4] to set the frames. Any time from 0 to 999f can be set. The time which can be set when seconds are used as the display unit differs depending on the system format. 59.94i: max. 33s09f 59.94p: max. 16s39f 50i: max. 39s24f 50p: max. 19s49f 29.97PsF: max. 33s9f 25PsF: max. 39s24f 24PsF: max. 41s15f 23.98PsF: max. 41s15f 5 Use [F4] to set enable or disable for the transition using the Transition item. On Enable Off Disable When disable has been set for the transition, the output signals are switched with no transition when the output signals set in AUX1 is switched. 65