Pioneer 141FD Owner's Manual - Page 78
Issue, Possible Solutions - buzzing
UPC - 012562905761
View all Pioneer 141FD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
07 Helpful Information Picture Issue Possible Solutions Picture does not appear properly • Check the setting for Color Decoding when using INPUT 2 or INPUT 3 (pages 52 and 53). • Check the setting for Signal Type. • Check the setting for Video when using INPUT 4 through INPUT 8 (page 54). • Check the setting for Signal Format when using INPUT 3 through INPUT 8 (page 54). After-image lag • If a bright or still image was on screen for a long period before switching to a darker image, the original image may appear as an after-image or ghost. Try playing another bright image, switching the picture quickly many times, or show a very active scene. • Use the Long Life Settings function (see "4.2.1 Extend Your Panel Life") • Display the Video Pattern screen to help reduce after-image lag. KURO LINK Issue KURO LINK does not function Error message: "The device cannot be operated. Please check connection" Possible Solutions • Check the connections between the panel and the HDMI equipment. • Confirm that the settings for the panel are correct. • Confirm that the equipment is HDMI compliant. • Confirm that settings for the equipment are correct. For details, refer to the operating instructions that came with the equipment. • Check the connections between the panel and the HDMI equipment. • Confirm that settings for the equipment are correct. For details, refer to the operating instructions that came with the equipment. No picture • Check the connections between the panel and the HDMI equipment. • Confirm that settings for the equipment are correct. For details, refer to the operating instructions that came with the equipment. Panel sounds/noises • Some sounds are appropriate for plasma technology. Examples: fan motor noise, electrical circuit humming, glass panel buzzing, etc. Brightness on sides of • Display content that completely fills the screen until unevenness is minimized. screen are uneven • Change the AV mode setting. IP Control Issue Possible Solutions Web browser screen does not open after entering the correct IP Address • Confirm that the indicator turns on after setting the LED option to On. • Check the cable connection if the indicator does not light. • Confirm that the other end of the cable is properly connected to the PC, hub or router if the indicator does not light. The indicator lights but the web browser screen does not open • Confirm that the other end of the cable is not connected to any other device than Ethernet (such as a telephone). • When using a DHCP, confirm that the IP Address allocated by the server has not changed (the address may change as a DHCP server reallocates the addresses periodically). Entering an IP Address • Confirm that the DHCP server is activated within the network. fails even after activating the DHCP function 78 En