Samsung NP-X360 User Manual Vista Ver.1.8 (English) - Page 102
Internet Protocol Version 4 TCP/IPv4, Networking, Properties, Obtain an IP address, automatically
UPC - 036725721203
View all Samsung NP-X360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
5 Select Internet Protocol Version 4 (TCP/IPv4) from the Networking tab and click Properties. 6 Configure the IP settings. When using DHCP, select Obtain an IP address automatically. To use a static IP address, select Use the following IP address, and set the IP address manually. The LAN device driver may differ depending on your LAN device model. To add a network component, click Install in the screen shown in the figure above. You can add clients, services, and protocols. When not using DHCP, ask your network administrator for the IP address. 7 When you have completed the settings, click the OK button. The network settings have been completed. 101
101
5
Select
Internet Protocol Version 4 (TCP/IPv4)
from the
Networking
tab and click
Properties
.
The LAN device driver may differ depending on your
LAN device model.
To add a network component, click
Install
in the
screen shown in the figure above. You can add
clients, services, and protocols.
6
Configure the IP settings.
When using DHCP, select
Obtain an IP address
automatically
. To use a static IP address, select
Use the following IP address
, and set the IP
address manually.
When not using DHCP, ask your network administrator
for the IP address.
7
When you have completed the settings, click the
OK
button.
The network settings have been completed.