Sharp MX 4501N Installation Manual - Page 30

Paper size switch from A4 to B5

Get Sharp MX 4501N - Color Laser - All-in-One PDF manuals and user guides View all Sharp MX 4501N manuals
Add to My Manuals
Save this manual to your list of manuals

Page 30 highlights

3) Slightly push the tray, restore the stopper to the original position, and fix the fixing screw. 2) Loosen the stopper fixing screw (1 pc) on the right lower side of the tray so that the stopper does not function. At that time, check to insure that the stopper pawl is engaged with the stopper reception of the large capacity tray unit. 3) Pull out the tray again until it stops. 4) Slowly insert the tray to the original position. a. Side plate size switch 1) Remove four fixing screws (blue screws) which are fixing the upper and the lower sections of the side plate F and the side plate R. F side R side (2) Paper size switch from A4 to B5 Since the factory setting of the paper size is A4, if paper size switch is required, perform the following procedures. 1) Slowly pull out the tray until it stops. 2) Adjust the mark position of the tray and the side plates in the lower section of the side plates F/R according to the desired size. Also adjust the upper section according to the desired size, and fix with the four fixing screws (blue screws). MX3500N MX-LCX1 4 - 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
MX3500N
MX-LCX1
4 – 6
3)
Slightly push the tray, restore the stopper to the original posi-
tion, and fix the fixing screw.
At that time, check to insure that the stopper pawl is engaged
with the stopper reception of the large capacity tray unit.
4)
Slowly insert the tray to the original position.
(2)
Paper size switch from A4 to B5
Since the factory setting of the paper size is A4, if paper size switch
is required, perform the following procedures.
1)
Slowly pull out the tray until it stops.
2)
Loosen the stopper fixing screw (1 pc) on the right lower side
of the tray so that the stopper does not function.
3)
Pull out the tray again until it stops.
a.
Side plate size switch
1)
Remove four fixing screws (blue screws) which are fixing the
upper and the lower sections of the side plate F and the side
plate R.
2)
Adjust the mark position of the tray and the side plates in the
lower section of the side plates F/R according to the desired
size. Also adjust the upper section according to the desired
size, and fix with the four fixing screws (blue screws).
F side
R side