Sharp MX 4501N Installation Manual - Page 68
Clear the image memory., Connect the line cable to the fax box unit.
View all Sharp MX 4501N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
J. Clear the image memory. 1) Switch the operation panel to the copy mode and use the key operation [P], [∗], [C], and [∗] to enter the simulation mode. 2) Use the numeric keys to enter [66] in the main code entry screen shown below and press the [START] key. K. Connect the line cable to the fax box unit. Connect the line cable of the line side to the modular jack indicated with "LINE." 3) Use the numeric keys to enter [10] in the sub-code entry screen shown below and press the [START] key. • For using an external telephone: For using an external telephone, wind the line cable around the supplied ferrite core by two turns and connect the cable to the modular jack indicated with "TEL." 4) In the submenu screen shown below, press [EXECUTE] on the touch panel. After [YES] on the panel lights up, press it. 5) The screen shown below is displayed and memory clear operation is executed. 6) After several minutes, memory clear operation is completed and the [YES] button goes out. Press the [CA] key to exit from the simulation mode. Then the main unit is automatically rebooted. MX3500N MX-FXX1 14 - 4