Sharp MX 4501N Installation Manual - Page 35
Turn off the power of the main unit, Removal of the paper holding arm unit, Installation of
View all Sharp MX 4501N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
2. Installation * Before starting installation, check to insure that the data lamp on the operation panel does not light up or blink. A. Turn off the power of the main unit 1) Turn OFF the power switch on the operation panel. OFF B. Removal of the paper holding arm unit 1) Push up the section A to disengage the pawl, and remove the paper holding arm and the paper holding arm holder together as a unit. * Be careful to remove both of the paper holding arm (which is easily removed alone) and the paper holding arm holder. 2 OFF 2) Open the front cabinet. Turn OFF the power switch in the front cabinet of the main unit. OFF 1 A C. Installation of the inner finisher 1) Open the front cover. 3) Remove the earth cord and disconnect the power plug of the main unit from the power outlet. 2) Remove two screws, and remove the front cabinet upper. MX3500N MX-FNX1 5 - 2