Sharp MX 4501N Installation Manual - Page 60
TINGS], and touch the [DOCUMENT CONTROL SET
View all Sharp MX 4501N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
3 : Jul. 15 2006 3 Describes details of the check operations following. 1) Enable the document control function. Touch the [SYSTEM SETTINGS], and touch the [DOCUMENT CONTROL SETTING]. Set the copy mode to always print, enable the document control function. 2) Check the document control function. a) Set the color mode to full color with the initial screen of copy. b) Set the pattern print color to the [Y (Yellow)] and [C (Cyan)], set to the [Bk (Black)] with full color mode, then copy the blank paper with B/W mode. Use the specified A4 paper by SHARP, be sure to don't use the back print paper. c) Set on the document table the each paper that printed by procedure b), and copy it. d) After copy operating, [Detected the document control pattern. Job is aborted.] is displayed on the touch panel. If the message displayed and no print is made, the operation check is completed. If the result executed by each color ([Y (Yellow)] / [C (Cyan)] / [Bk (Black)]) displays [Detected the document control pattern. Job is aborted.], the operation check is normally completed. e) When print is made at procedure d), check the connection of the DOCC PWB. f) After check at the installing, touch the [SYSTEM SETTINGS], and touch the [DOCUMENT CONTROL SETTING], then set the copy mode to always unprint. (When case of maintenance, set to the original user setting.) MX3500N MX-FRX2, MX-FRX2U 9 - 4