Sony DPP-FP50 Operating Instructions - Page 13

• Never put your hand into the cartridge compartment. The thermal head reaches high temperatures, especially after repeated printing. 4 Inserting the print paper 1 Open the eject paper tray. • Do not rewind the ink ribbon and use the rewound print cartridge for printing. Otherwise, proper printing result will not be obtained, or even a malfunction may occur. • If the print cartridge does not click into place, remove it and then re-insert it. If the ink ribbon is too slack to be loaded, wind the ink ribbon in the direction of the arrow to remove the slack. 2 Slide the paper tray lid in the opposite direction to the paper feeding direction (1) and then lift open it (2). Preparations • Do not remove the print cartridge while printing. Notes on storing the print cartridge • Avoid placing the print cartridge in a location subject to high temperatures, high humidity, excessive dust or direct sunlight • When you are going to store a partially-used cartridge, store it in its original bag. 3 Set the tray adaptor according to the print paper size you want to use. Note In some regions, 3.5 x 5 inch size print paper is not sold. And the tray adaptor is not supplied. Continued 13 GB