Sony DPP-FP50 Operating Instructions - Page 15
tray compartment lid. - printer paper
UPC - 027242678583
View all Sony DPP-FP50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Preparations 6 Close the paper tray lid (1) and slide it to the paper feeding direction (2). Keep the paper eject tray open. 7 Pull and open the printer's paper tray compartment lid. 8 Insert the paper tray into the printer. Insert it firmly until it clicks into place. If print paper runs out during printing, the paper error indicator ( ) appears on the LCD display of the printer. Remove the paper tray and feed the print paper. Notes • Do not remove the paper tray during printing. • To avoid paper jam or malfunctions of the printer, make sure the following before printing: - Do not write or type on the print paper. Use the oil ink pen to write on the paper after printing. You cannot type on the print paper. - Do not attach sticker or stamps on the print paper. - Do not hold or bend the print paper. - When adding print paper to a partially full tray, make sure that the total number of sheets does not exceed 20 for the print paper. - Do not print on the used print paper. Printing an image twice on the same paper will not make the printed image thicker. - Use the print paper for this printer only. - Do not use the print paper ejected without printed. Notes on storing the print paper • Avoid storing the paper with the printed faces touching each other or in contact with rubber or plastic products including vinyl chloride or plasticizer for an extended period of time; color changes or deterioration of the printed image may occur. • Avoid placing the print paper in a location subject to high temperatures, high humidity, excessive dust or direct sunlight. • When you are going to store partially-used print paper, store it in its original bag. 15 GB