Stihl MS 162 Instruction Manual - Page 37
Cleaning
View all Stihl MS 162 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
20 Cleaning ► Clean and spray the guide bar with a resin sol‐ vent, such as STIHL Resin Remover and Lubricant. ► Clean the saw, 20.1. ► Clean the air filter, 20.3. ► Fill up the chain oil tank, 11.2. ► Store the saw indoors in a dry and secure location, out of the reach of children and other unauthorized persons. 20 Cleaning 20.1 Cleaning the Chain Saw WARNING ■ To reduce the risk of personal injury from unin‐ tended activation, shut off the engine and engage the chain brake before carrying out any cleaning work, 8. Users of this chain saw should carry out only the cleaning descri‐ bed in this manual. To clean the chain saw: ► Shut off the engine, 15. ► Engage the chain brake, 12.1. ► Clean the chain saw's polymer components with a slightly dampened cloth. Do not use detergents or solvents. They may damage the polymer components. ► Remove the shroud and clean the cylinder fins. ► Remove the sprocket cover and clean the area around the chain sprocket with a slightly dampened cloth or resin solvent, such as STIHL Resin Remover & Lubricant. ► Do not use a pressure washer to clean the chain saw or otherwise spray it with water or other liquids. 20.2 Cleaning the Guide Bar and Saw Chain WARNING ■ To reduce the risk of personal injury from unin‐ tended activation, shut off the engine and engage the chain brake before carrying out any cleaning work, 5. Users of this chain saw should carry out only the cleaning descri‐ bed in this manual.To help prevent injuries, always wear heavy-duty work gloves when handling the chain. To properly clean the guide bar and chain: ► Shut off the engine, 15.1. ► Engage the chain brake, 12.1. 0458-200-8621-A English ► Remove the guide bar and the chain, 10.2. 1 3 0000097431_001 2 3 ► Clean the oil outlet duct (1), oil inlet bore (2) and groove (3) with a brush, a slightly damp‐ ened cloth or resin solvent, such as STIHL Resin Remover & Lubricant. Do not use deter‐ gents. ► Clean the chain with a brush, a slightly damp‐ ened cloth or resin solvent. Do not use deter‐ gents. ► Do not use a pressure washer to clean the guide bar or chain or otherwise spray them with water or other liquids. 20.3 Cleaning the Air Filter Very fine dust can collect in the air filter and block proper air flow. To clean the air filter: ► Shut off the engine, 15.1. ► Engage the chain brake, 12.1. 0000097430_001 1 1 1 2 ► Turn the screws (1) counterclockwise until the shroud (2) can be removed. ► Remove the shroud. 5 6 4 3 ► Press the locking tab (3) forward and remove the air filter (4). ► If the air filter is damaged, replace it. 37 0000097432_001