Symantec 10490452 Administration Guide - Page 160

160 Configuring alerts and logs Configuring logs Table 8-3 Log Settings page - Local Log Type (Continued) Item Description Mail Transfer Agent Apply to All Hosts Maximum log size Maximum number of days to retain Log Expunger frequency Log Expunger start time Enable message logs Event Viewer/Syslog Settings Set the logging level for the Mail Transfer Agent. Apply these log settings to all hosts in your system. If desired, set the maximum size for logs. If desired, set the retention period for logs. Set the frequency for flushing logs. Set the start time for flushing logs. Select this option to trace all messages through the mail flow. Enable remote system logging. Configure logs Follow these procedures to configure log settings. To configure log settings for local hosts 1 In the Control Center, click Settings > Logs. 2 Click the Local tab. 3 Under Logging, choose a Scanner from the Host drop-down list. 4 Use the component drop-down lists to select the logging level for each component. 5 Select Apply to all Hosts to propagate these settings to all Scanners in your system. 6 To reduce the size of the log table under Log Storage Limits, check Maximum log size. As the table exceeds the size specified, the oldest entries are removed. If you check Maximum log size, indicate an upper limit for log size in KB, MB, or GB. The default is 50 MB. 7 Type a numeric value in Maximum number of days to retain. The default is seven. 8 Under Log Expunger, choose a frequency and a start time when the Control Center runs the Log Expunger to delete log data. The default is once per day. 9 To trace the path of particular messages through the mail flow, click Enable message logs.