TP-Link 10GE T1700G-28TQUN V1 User Guide - Page 126
VLAN Config
View all TP-Link 10GE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
Note: 1. Fast Leave on the port is effective only when the host supports IGMPv2 or IGMPv3. 2. When Fast Leave feature is enabled, the leaving of a user connected to a port owning multi-user will result in the other users intermitting the multicast business. 9.1.3 VLAN Config Multicast groups established by IGMP snooping are based on VLANs. On this page you can configure different IGMP parameters for different VLANs. Choose the menu Multicast→IGMP Snooping→VLAN Config to load the following page. Figure 9-7 VLAN Config The following entries are displayed on this screen: VLAN Config VLAN ID: Router Port Time: Member Port Time: Router Ports: Enter the VLAN ID to enable IGMP snooping for the desired VLAN. Specify the aging time of the router port. Within this time, if the switch doesn't receive IGMP query message from the router port, it will consider this port is not a router port any more. By default, it is 0 and the global router-time will be used. Specify the aging time of the member port. Within this time, if the switch doesn't receive IGMP report message from the member port, it will consider this port is not a member port any more. By default, it is 0 and the global member-time will be used. Specify the static router port which is mainly used in the network with stable topology. 116