TP-Link 10GE T1700G-28TQUN V1 User Guide - Page 70
Traffic Monitor
View all TP-Link 10GE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Select: Port: Admin Key: Port Priority: Mode: Status: LAG: Click LAGS to configure the link aggregation groups. Select the desired port for LACP configuration. It is multi-optional. Displays the port number. Specify an Admin Key for the port. The member ports in a dynamic aggregation group must have the same Admin Key. Specify a Port Priority for the port. This value determines the priority of the port to be selected as the dynamic aggregation group member. The port with smaller Port Priority will be considered as the preferred one. If the two port priorities are equal; the port with smaller port number is preferred. Specify LACP mode for your selected port. Enable/Disable the LACP feature for your selected port. Displays the LAG number which the port belongs to. 6.3 Traffic Monitor The Traffic Monitor function, monitoring the traffic of each port, is implemented on the Traffic Summary and Traffic Statistics pages. 6.3.1 Traffic Summary Traffic Summary screen displays the traffic information of each port, which facilitates you to monitor the traffic and analyze the network abnormity. Choose the menu Switching→Traffic Monitor→Traffic Summary to load the following page. Figure 6-12 Traffic Summary The following entries are displayed on this screen: 60