TP-Link TL-SL5428E User Guide - Page 120
bridge address static
UPC - 845973020873
View all TP-Link TL-SL5428E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
TL-SL5428E 24-port 10/100Mbps + 4-port Gigabit L2 Managed Switch CLI Guide Command Mode Interface Configuration Mode(interface ethernet / interface range ethernet) Example Enable Port Security function for port1, select Static mode as the learn mode, and specify the maximum number of MAC addresses that can be learned on this port as 30: TP-LINK(config)# interface Ethernet 1 TP-LINK(config-if)# bridge address port-security max-number 30 mode static state enable bridge address static Description The bridge address static command is used to add the static MAC address entry. To remove the corresponding entry, please use no bridge address static command. The static address can be added or removed manually, independent of the aging time. In the stable networks, the static MAC address entries can facilitate the switch to reduce broadcast packets and enhance the efficiency of packets forwarding remarkably. Syntax bridge address static {mac mac} {vid vid} {port port} no bridge address static [mac] [vid] [port] Parameter mac --The MAC address of the entry you desire to add. vid -- The VLAN ID number of your desired entry. It ranges from 1 to 4094. port -- The Port number of your desired entry. It ranges from 1 to 28. Command Mode Global Configuration Mode Example Add a static Mac address entry to bind the MAC address 00:02:58:4f:6c:23, VLAN1 and Port1 together: TP-LINK(config)# bridge address static mac 00:02:58:4f:6c:23 vid 1 port 1 108