TP-Link TL-SL5428E User Guide - Page 157
acl bind to-port
UPC - 845973020873
View all TP-Link TL-SL5428E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
TL-SL5428E 24-port 10/100Mbps + 4-port Gigabit L2 Managed Switch CLI Guide vlan-id -- The VLAN ID of Redirect. The data packets those match the corresponding ACL will be forwarded in the specific VLAN. The VLAN ID ranges from 1 to 4094. dscp -- DSCP of QoS Remark. Specify the DSCP region for the data packets those match the corresponding ACL. DSCP ranges from 0 to 63. By default, it is not limited. local-pri -- Local Priority of QoS Remark. Specify the local priority for the data packets those match the corresponding ACL. Local Priority ranges form 0 to 3. mirror -- The Mirror Port of Stream Mirror, ranging form 1 to 28. By default, it is 1. Command Mode Global Configuration Mode Example Create a Policy named policy1. For the data packets those match ACL 120 in the policy, if the rate beyond 1000kbps, will be discarded by the switch: TP-LINK(config)# acl policy policy-add policy1 TP-LINK(config)# acl policy action-add policy1 120 rate 1000 osd discard acl bind to-port Description The acl bind to-port command is used to bind a policy to a port. To cancel the bind relation, please use no acl bind to-port command. Syntax acl bind to-port {policy-name} {port} no acl bind to-port {policy-name} {port} Parameter policy-name -- The name of the policy desired to bind. port -- The number of the port desired to bind, ranging from 1 to 28. Command Mode Global Configuration Mode Example Bind policy1 to Port 1: 145