TP-Link TL-SL5428E User Guide - Page 67
user access-control mac-based, user access-control port-based
UPC - 845973020873
View all TP-Link TL-SL5428E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
TL-SL5428E 24-port 10/100Mbps + 4-port Gigabit L2 Managed Switch CLI Guide Example Enable the access-control of the user whose Ip address is 192.168.0.148: TP-LINK(config)# user access-control ip-based 192.168.0.148 255.255.255.0 user access-control mac-based Description The user access-control mac-based command is used to limit the MAC Address of the users for login. Only the current host and the user with this MAC Address you set here are allowed for login Syntax user access-control mac-based mac-addr Parameter mac-addr -- The source MAC address. Command Mode Global Configuration Mode Example Enable the access-control of the user whose MAC address is 00:00:13:0A:00:01: TP-LINK(config)# user access-control mac-based 00:00:13:0A:00:01 user access-control port-based Description The user access-control port-based command is used to to limit the ports for login. Only the current host and the users connected to these ports you set here are allowed for login. Syntax user access-control port-based port-list Parameter port-list --The Ethernet port numbers. You can appoint 5 ports at most. 55