TP-Link TL-SL5428E User Guide - Page 177
igmp filter-add, igmp filter-config
UPC - 845973020873
View all TP-Link TL-SL5428E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 177 highlights
TL-SL5428E 24-port 10/100Mbps + 4-port Gigabit L2 Managed Switch CLI Guide TP-LINK(config)# igmp static-entry-add 225.0.0.1 2 3 igmp filter-add Description The igmp filter-add command is used to configure the multicast IP-range desired to filter. To delete the corresponding IP-range, please use no igmp filter-add command. When IGMP Snooping is enabled, you can specified the multicast IP-range the ports can join so as to restrict users ordering multicast programs via configuring multicast filter rules. Multicast IP addresses ranges from 224.0.0.0 to 239.255.255.255. The range for receivers to join is from 224.0.1.0 to 239.255.255.255. Syntax igmp filter-add {id} {start-ip} {end-ip} no igmp filter-add {id} Parameter id -- IP-range ID, ranging from 1 to 30. start-ip -- The start multicast IP of the IP-range. end-ip -- The end multicast IP of the IP-range. Command Mode Global Configuration Mode Example Add multicast IP-range 225.0.0.1~225.0.0.4 to filter, and specify the IP-range ID as 20: TP-LINK(config)# igmp filter-add 20 225.0.0.1 225.0.0.4 igmp filter-config Description The igmp filter-config command is used to modify the multicast filtering IP-range. Syntax igmp filter-config {id} {start-ip} {end-ip} Parameter 165