TP-Link TL-SL5428E User Guide - Page 22
TL-SL5428E, TP-LINKconfig-if, Global Configuration Mode, Spanning Tree, Schedule Mode and so on.
UPC - 845973020873
View all TP-Link TL-SL5428E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
TL-SL5428E 24-port 10/100Mbps + 4-port Gigabit L2 Managed Switch CLI Guide Use the interface type Use the end command or press Ctrl+Z Interface Configuration Mode number command to enter this mode from Global Configuration mode. TP-LINK(config-if )# to return to Privileged EXEC mode. Enter exit command to return to Global Configuration mode. A port number must be specified in the interface command. VLAN Configuration Mode Use the vlan database command to enter this mode from Global Configuration mode. TP-LINK(configvlan)# Use the end command or press Ctrl+Z to return to Privileged EXEC mode. Enter the exit command to return to Global configuration mode. Note: 1. The user is automatically in User EXEC Mode after the connection between the PC and the switch is established by a console port or by a telnet connection. 2. Each command mode has its own set of specific commands. To configure some commands, you should access the corresponding command mode firstly. z Global Configuration Mode: In this mode, global commands are provided, such as the Spanning Tree, Schedule Mode and so on. z Interface Configuration Mode: In this mode, users can configure one or several ports, different ports corresponds to different commands a). Interface Ethernet: Configure parameters for an Ethernet port, such as Duplex-mode, flow control status. b). Interface range Ethernet: The commands contained are the same as that of the Interface Ethernet. Configure parameters for several Ethernet ports. c). Interface link-aggregation: Configure parameters for a link-aggregation, such as broadcast storm. d). Interface range link-aggregation: Configure parameters for multi-trunks. e). Interface vlan: Configure parameters for the vlan-port. z Vlan Configuration Mode: In this mode, users can create a VLAN and add a specified port to the VLAN. 3. Some commands are global, that means they can be performed in all modes: z show: display all information of switch, for example: statistic information, port information, VLAN information. 10