TP-Link TL-SL5428E User Guide - Page 124
System Commands, system-descript, ip address
UPC - 845973020873
View all TP-Link TL-SL5428E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
TL-SL5428E 24-port 10/100Mbps + 4-port Gigabit L2 Managed Switch CLI Guide Chapter 21 System Commands System Commands can be used to configure the System information and System IP, reboot and reset the switch, upgrade the switch system and other operations. system-descript Description The system-descript command is used to configure the Device Name, Device Location and System Contact. To clear all the information, please use no system-descript command. Syntax system-descript { sysname {sysname} | location {location} | contact-info {contact_info} } no system-descript {sysname | location | contact_info} Parameter sysname -- System Name(Device Name). The length of the name ranges from 1 to 32 characters. By default, it is empty. location -- Device Location. It consists of 32 characters at most. By default, it is empty. contact_info -- Contact Information. It consists of 32 characters at most. By default, it is empty. Command Mode Global Configuration Mode Example Configure the System Contact as www.tp-link.com.cn: TP-LINK(config)# system-descript contact-info www.tp-link.com.cn ip address Description The ip address command is used to configure the IP Address, Subnet Mask and Default Gateway. To restore to the factory defaults, please use no ip address command. 112