TP-Link TL-SL5428E User Guide - Page 122
show bridge dynamic-bind, show bridge address
UPC - 845973020873
View all TP-Link TL-SL5428E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
TL-SL5428E 24-port 10/100Mbps + 4-port Gigabit L2 Managed Switch CLI Guide Command Mode Global Configuration Mode Example Add a filtering address entry whose VLAN ID is 1 and MAC address is 00:1e:4b:04:01:5d: TP-LINK(config)# bridge address filtering 00:1e:4b:04:01:5d 1 show bridge dynamic-bind Description The show bridge dynamic-bind command is used to configure the Port Security for each port, such as configure the Max number of MAC addressed that can be learned on the port and the Learn Mode. Syntax show bridge dynamic-bind [port-num] Parameter port-num -- The port number of the switch. It ranges from 1 to 28. By default, the Port Security configuration of all ports is displayed. Command Mode Any Configuration Mode Example Display the Port Security configuration of port2: TP-LINK(config)# show bridge dynamic-bind 2 show bridge address Description The show bridge address command is used to display the information of all Address entries. Syntax show bridge address { dynamic | static | filter | all } Parameter dynamic | static | filter | all -- the type of your desired entry Command Mode 110