TP-Link TL-SL5428E User Guide - Page 194

TL-SL5428E 24-port 10/100Mbps + 4-port Gigabit L2 Managed Switch CLI Guide snmp-rmon event enable {index} no snmp-rmon event enable {index} Parameter index -- The index number of the entry desired to enable, ranging from 1 to 12, in the format of 1-3,5. Command Mode Global Configuration Mode Example Enable the SNMP-RMON Event entries 1,2,3,4 and 8: TP-LINK(config)# snmp-rmon event enable 1-4,8 snmp-rmon alarm config Description The snmp-rmon alarm config command is used to configure SNMP-RMON Alarm Management. To return to the default configuration, please use no snmp-rmon alarm config command. Alarm Group is one of the commonly used RMON Groups. RMON alarm management allows monitoring the specific alarm variables. When the value of a monitored variable exceeds the threshold, an alarm event is generated, which triggers the switch to act in the set way. Syntax snmp-rmon alarm config {index} [var { drop | revbyte | revpkt | bpkt | mpkt | crc-align | undersize | oversize | fragment | jabber | collision | 64 | 65-127 | 128-511 | 512-1023 | 1024-10240 }] [port port] [s-type { absolute | increment }] [r-hold r-hold] [r-event r-event] [f-hold f-hold] [f-event f-event] [a-type { rise | fall | all }] [interval interval] no snmp-rmon alarm config {index} Parameter index -- The index number of the Alarm Management entry, ranging from 1 to 12, in the format of 1-3,5. var -- The alarm variable. By default, the option is drop. port -- The port on which the Alarm entry acts, ranging from 1 to 28. s-type -- Sample Type, which is the sampling method for the selected variable and comparing the value against the thresholds. There are two options, absolute and increment. Absolute indicates comparing the values directly with 182