TP-Link TL-SL5428E User Guide - Page 144
qos dscp enable, qos dscp config
UPC - 845973020873
View all TP-Link TL-SL5428E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
TL-SL5428E 24-port 10/100Mbps + 4-port Gigabit L2 Managed Switch CLI Guide Example Map tag value 0 to TC3: TP-LINK(config)# qos dot1p config 0 3 qos dscp enable Description The qos dscp enable command is used to enable the mapping relation between DSCP Priority and Egress Queue. To disable the mapping relation, please use no qos dscp enable command. Syntax qos dscp enable no qos dscp enable Command Mode Global Configuration Mode Example Enable the mapping relation between DSCP Priority and Egress Queue: TP-LINK(config)# qos dscp enable qos dscp config Description The qos dscp config command is used to configure the mapping relation between DSCP Priority and Egress Queue. To return to the default configuration, please use no qos dscp config command. DSCP (DiffServ Code Point) is a new definition to IP ToS field given by IEEE. This field is used to divide IP datagram into 64 priorities. When DSCP Priority is enabled, IP datagram are mapped to different priority levels based on DSCP priority mode; non-IP datagram with IEEE 802.1Q tag are mapped to different priority levels based on IEEE 802.1P priority mode if IEEE 802.1P Priority is enabled; the untagged non-IP datagram are mapped based on port priority mode. Syntax qos dscp config {dscp-list} {cos-id} no qos dscp config Parameter 132