TP-Link TL-SL5428E User Guide - Page 135
storm-control
UPC - 845973020873
View all TP-Link TL-SL5428E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 135 highlights
TL-SL5428E 24-port 10/100Mbps + 4-port Gigabit L2 Managed Switch CLI Guide no negotiation Parameter auto -- Auto negotiation (default). 10h -- 10M half-duplex. 10f -- 10M full-duplex. 100h -- 100M half-duplex. 100f -- 100M full-duplex. 1000f -- 1000M full-duplex. Command Mode Interface Configuration Mode(interface ethernet / interface range ethernet) Example Configure the Negotiation Mode as 100M full-duplex for Ethernet port5: TP-LINK(config)# interface Ethernet 5 TP-LINK(config-if)# negotiation 100f storm-control Description The storm-control command is used to configure the Storm Control function. To disable the Storm Control function, please use no storm-control command. Storm Control function allows the switch to filter broadcast, multicast and UL frame in the network. If the transmission rate of the three kind packets exceeds the set bandwidth, the packets will be automatically discarded to avoid network broadcast storm. Syntax storm-control [bc-rate bc-rate] [mc-rate mc-rate] [ul-rate ul-rate] no storm-control Parameter bc-rate -- The maximum ingress rate of the Broadcast. The packet traffic exceeding the bandwidth will be discarded. The value of it can be 100 | 200| 500kbps or 1 | 2 | 4 | 5 | 10 | 20 | 40 | 50mbps. mc-rate -- The maximum ingress rate of the Multicast packets. The packet traffic exceeding the bandwidth will be discarded. The value of it can be 100 | 200| 500kbps or 1 | 2 | 4 | 5 | 10 | 20 | 40 | 50mbps. ul-rate -- The maximum ingress rate of the UL-Frame. The packet traffic 123