TP-Link TL-SL5428E User Guide - Page 204
cluster create, cluster manage config
UPC - 845973020873
View all TP-Link TL-SL5428E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 204 highlights
TL-SL5428E 24-port 10/100Mbps + 4-port Gigabit L2 Managed Switch CLI Guide cluster create Description The cluster create command is used to specify the current switch as commander switch and create cluster. To implement the management and maintenance operations intended for the member switches in a cluster through the commander switch, the commander switch needs to dynamically assign an IP address used in the cluster to each member switch for internal communication. Syntax cluster create {name} {ip} {ip-mask} Parameter name -- The cluster name, ranging from 1 to 16 characters. ip -- The cluster IP address pool. ip-mask -- The cluster IP address mask. Command Mode Global Configuration Mode Example Specify the current switch as commander switch, create cluster c1, and configure the cluster IP address pool as 10.90.90.1~10.90.90.254: TP-LINK(config)# cluster create c1 10.90.90.10 255.255.255.0 cluster manage config Description The cluster manage config command is used to configure Cluster. Syntax cluster manage config {name} {keep-time} {interval} Parameter name -- The name of the cluster desired to configure. keep-time -- Hold Time, which is the time for the switch to keep the cluster information. Hold Time ranges from 1 to 255 in seconds. By default, it is 20. interval -- Interval Time, which is the interval to send handshake packets. Interval Time ranges from 1 to 255 in seconds. By default, it is 20. 192