TP-Link TL-SL5428E User Guide - Page 86
IP Source Guard Commands, ip source guard - default ip
UPC - 845973020873
View all TP-Link TL-SL5428E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
TL-SL5428E 24-port 10/100Mbps + 4-port Gigabit L2 Managed Switch CLI Guide Chapter 14 IP Source Guard Commands IP Source Guard is to filter the IP packets based on the IP-MAC Binding entries. Only the packets matched to the IP-MAC Binding rules can be processed, which can enhance the bandwidth utility. ip source guard Description The ip source guard command is used to enable the IP Source Guard function for the specified port. To disable the IP Source Guard function, please use no ip source guard command. Syntax ip source guard {disable | sip | sip+mac} no ip source guard Parameter disable | sip | sip+mac--Security type. Disable indicates to disable the IP Source Guard feature for the port. Sip indicates that only the packets with its source IP address and port number matched to the IP-MAC binding rules can be processed. Sip_mac indicates that only the packets with its source IP address, source MAC address and port number matched to the IP-MAC binding rules can be processed. By default, the option is disable. Command Mode Interface Configuration Mode(interface ethernet / interface range ethernet) Example Enable the IP Source Guard function for the ports 5-10. Configure that only the packets with its source IP address, source MAC address and port number matched to the IP-MAC binding rules can be processed: TP-LINK(config)# interface range Ethernet 5-10 TP-LINK(config-if)# ip source guard sip+mac 74