TP-Link TL-SL5428E User Guide - Page 189
snmp-rmon history sample-cfg
UPC - 845973020873
View all TP-Link TL-SL5428E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 189 highlights
TL-SL5428E 24-port 10/100Mbps + 4-port Gigabit L2 Managed Switch CLI Guide timeout -- The maximum time for the switch to wait for the response from the management station before resending a request, ranging from 1 to 3600 in seconds. Command Mode Global Configuration Mode Example Add a Notification entry, and configure the IP Address of the management Host as 192.168.0.1, the UDP port as 162, the User name of the management station as admin, the Security Model of the management station as v2c, the type of the notifications as inform, the maximum time for the switch to wait as 1000 seconds, and the resending time as 100: TP-LINK(config)# snmp notify-add 192.168.0.1 162 admin smode v2c type inform resend 100 timeout 1000 snmp-rmon history sample-cfg Description The snmp-rmon history sample-cfg command is used to configure the history sample entry. To return to the default configuration, please use no snmp-rmon history sample-cfg command. RMON (Remote Monitoring), basing on SNMP architecture, functions to monitor the network. History Group is one of the commonly used RMON Groups. After a history group is configured, the switch collects network statistics information periodically, based on which the management station can monitor network effectively. Syntax snmp-rmon history sample-cfg {index} {port} {interval} no snmp-rmon history sample-cfg {index} Parameter index -- The index number of the entry, ranging from 1 to 12, in the format of 1-3,5. port -- The port from which the history samples were taken, ranging from 1 to 28. interval -- The interval to take samplings from the port, ranging from 10 to 3600 in seconds. By default, it is 1800. Command Mode 177